A already Amiga-formatted drive will show ad You will see a list if your devices means a unknown disk, this is our CF card. Read/write and Bootable should be ticked. Now we have to setup a temporary partition for the rescuepartition.Īt Devicename write something like “resc”Īnd Path, choose e path to where the data is to be stored, this does not really matter as you will erase it later. 4MB is actually enough but, well why not more? In ROM at “Main ROM file” choose your kickstartfile.Īnd at RAM choose a Z3 Fastmemory that is enough. In Chipset, tick “AGA” and chipsets extra to “A1200” The rest is not that important for our task. In “CPU and FPU” set the cpu to 68030, tick Fastest Possible and “JIT” If you have UAC enabled press yes at the UAC Question that pops up. Rightclick WinUAE and choose “Run as administrator” Time to start WinUAE, this must be started as Admin for this to work. If there was more partitions, you have to select more partitions and delete them. So it is very important to be VERY careful. If you have forgot to select the correct disk etc you have problems as you MIGHT have deleted the wrong partition. first by selecting itĪnd then use the command “delete partition override” Here I can see that my card contains one partition. Now we want to check partitions on the disk (card), this is done by “ list partition” (THIS IS IMPORTANT TO DO! IF YOU DOESN’T DO THIS YOU MAY ERASE THE WRONG PARTITION ON THE WRONG DISK!) So to work with this disk, we write “ select disk 1” To check what disk we have to work with, we have to list all disks in your system.Ĭheck the result, you can see that I have a 298GB disk and a 3811MB one. Start a command prompt by searching for “ cmd” and rightclick on the commandprompt icon and choose “Run as Administrator” if you get a UAC prompt, answer yes.Īt the prompt write “ diskpart” and press enter We have to do it with the command “Diskpart” We have to remove the partition, this is of some strange reason not possible using normal Windows GUI. As we have stuff on it, WinUAE will refuse us to use it as a writeable disk. So I push my new CF Card into my machine and start it up.Īs you can see, I have a new empty disk this is my CF card. My machine is equipped with a SATA -> CF Adapter, but a USB one should work aswell. But if you use large CF cards I recomend you to use 3.9 with all boingbags.įirst I want to apologise that my labb-windows-machine is in Swedish but hopefully you will manage with the screenshots anyway. I will use workbench 3.9 if you want to install 3.1 you are in your own after you mounted the CF etc.

So, I decided to do this step-by-step guide of doing both of this. How do I install Workbench on a CF Card to me moved to my Amiga

Many times on different forums I have seen the question:ġ.

Winuae command line